This page will show you the list of expendable tooling for the TS1000 BlockMaster.
*Photos may show an assembly, or may not show the exact model listed, but will be representative of the part. These prices are not guaranteed but can be used as a guideline. All prices will be confirmed before invoice is finalized.
Item |
Part Number |
Description |
Photo |
Price |
|
|---|---|---|---|---|---|
Surfacing |
|||||
| 10.5″ CW Cutter Plate | 18-01-3-00 |  |
$1950 | ||
| 15″ CW Cutter Plate | 18-01-4-00 | * | $2250 | ||
| 1/2″ CBN Insert for Cutter Plate | M1026 |  |
$210 | ||
| 1/2″ PCD Insert for Cutter Plate | M1054 |  |
$210 | ||
| 1K Cylinder Head Cradle Assembly | 18-06-0-00 |  |
$7995 | ||
Probing |
|||||
| Wired Probe | M1028 | ||||
| Wireless Probe Head | 19-08-0-01a |  |
Call for current pricing | ||
| Wireless Probe Receiver | 19-08-0-01b |  |
Call for current pricing | ||
| Standard Probe Stylus (50mm) | M1055 | $50 | |||
| Long Probe Stylus (100mm) | M1056 | $55 | |||
Boring |
|||||
| Size 6 Finish Boring Head | M1001 | Range: 2.677″-5.9″ with all three toolholders
*toolholders not included |
 |
$1200 | |
| C40 Shank PC6 – 6″ Length Modular CAT40 adapter | M1002 |  |
$335 | ||
| 3″ Extension for PC-6 boring head – 9″ cutting depth with one adapter | M1003 |  |
$240 | ||
| 361 Tool Holder – 2.677-4″ range | M1004 |  |
|||
| 362 Tool Holder – 3.637-4.960″ range | M1005 | * | |||
| 363 Tool Holder – 4.577-5.9″ range | * | ||||
| Tool Holder Screw for 360s | M1089 | Per Screw | $18 | ||
| Insert Screw for 360s | M1057 | Set of 5 | $35 | ||
| Small Radius (02) Finish Bore Cutting Inserts | M1080 | Set of 10 |  |
$170 | |
| Standard Radius (04) Finish Bore Cutting Inserts | M1066 | Set of 10 | * | $148 | |
| Large Radius (08) Finish Bore Inserts | M1019 | Set of 10 | * | $148 | |
| SANDVIK CCMT ROUGHING HEAD INSERTS | M1060 | Set of 10 |  |
$220 | |
| Small 460 Twin Bore Roughing Head | M1061 | Range with all tool holders 2.61 – 4.86″
*Toolholders not included |
 |
$605 | |
| C STYLE INSERT HOLDERS (PAIR) 460 small | M1062 | 2.61 – 3.48″ Range |  |
$370 | |
| C STYLE INSERT HOLDERS (PAIR) 460 mid | M1063 | 3.36 – 4.2″ Range | * | $410 | |
| C STYLE INSERT HOLDERS (PAIR) 460 large | M1064 | 4.1 – 4.86″ Range | * | $430 | |
| Large 460 Twin Bore Roughing Head | M1065 | 3.92 – 6.2″ Range
*Exact item may not be shown |
|
$700 | |
| 5″ CAT40 Shank | M1067 | |
$310 | ||
| Size 5 Finish Head Inch PC5-3515 | M1068 | Range with all tool holders | |
$1060 | |
| 351 Tool Holder | M1069 | 2.087-2.756″ Range | |
$155 | |
| 352 Tool Holder | M1070 | 2.551 – 3.22″ Range | * | $235 | |
| 353 Tool Holder | 3.071 – 3.74″ Range | * | $275 | ||
O-Rings |
|||||
| O-ring Tool Holder Bar | M1036 |  |
$250 | ||
| Universal Boring Head used with O-Ring and Chamfer tools | M1037 | * | $200 | ||
| CAT40 Adapter for 202-8043A Boring Head | M1038 | * | $100 | ||
| O-Ring Insert .120 | M1079 | Set of 5 |  |
$100 | |
| O-Ring Insert .037 (Other sizes available upon request) | M1035 | Set of 5 | * | $100 | |
Lifter Bores |
|||||
| 3/4 x 8 Solid Carbide Endmill | M1029 |  |
$685 | ||
| .842″ Carbide Tipped Lifter bore reamer | M1030 | * | $136 | ||
| .904″ Carbide Tipped Lifter bore reamer | M1031 | * | $137 | ||
| .937″ Carbide Tipped Lifter bore reamer | M1032 | * | $100 | ||
| 1.0000″ Carbide Tipped Lifter bore reamer | M1033 | * | $122 | ||
Line Boring |
|||||
| 341 Tool Holder | M1021 | |
$100 | ||
| 342 Tool Holder | M1022 | * | $190 | ||
| 343 Tool Holder | M1023 | * | $250 | ||
| Tool Holder Screw for 340s | M1024 | $18/ea | |||
| Line Bore CBN Insert | M1025 | Priced per insert |  |
$92 | |
| Short Boring Head | 19-02-6-00 |  |
|||
| Standard Line Bore Head | 19-02-4-00 | * | |||
| Large Boring Head | 19-02-8-00 | * | |||
| Line Bore Indicator Bar | 19-02-4-09 |  |
|||
| Drive Belt: Line Bore | 19-02-2-04 |  |
|||
| Centering System Sub-Assembly | 19-02-3-00 |  |
|||
Cam Boring |
|||||
| PC4 Boring Shank | M1044 |  |
$305 | ||
| PC4 Heavy Metal 15″ Extension | M1045 | * | $2150 | ||
| PC4 Standard 60mm Extension | M1046 | * | $230 | ||
| PC4 Shell Mill Adapter | M1047 | * | |||
| Walter Face Mill for SDMT Inserts | M1048 |  |
$375 | ||
| Kennemetal SDMT Inserts SDMT060304EGG | M1049 | Set of 10 |  |
$200 | |
| Electronic centering indicator assembly | 19-04-2-00 |  |
|||
| Alignment Indicator Bar for vertical block alignment | 19-04-0-03 | ||||
Miscellaneous |
|||||
| Vice Plate | 12-04-0-01 |  |
$2500 | ||
| CAT 40 Pull Stud | M1020 |  |
$20 | ||
| CAT 401/4″ Endmill Holder | M1006 |  |
$85 | ||
| CAT 40 3/8″ Endmill Holder | M1007 |  |
$75 | ||
| CAT 40 1/2″ Endmill Holder | M1008 |  |
$75 | ||
| CAT 40 3/4″ Endmill Holder | M1009 |  |
$75 | ||
| CAT 40 Jacobs Chuck Holder | M1010 |  |
$75 | ||
| Drill Chuck and Key | M1015 |  |
$25 | ||
| CAT40 ER32 Collet Chuck Holder | M1016 |  |
$65 | ||
| Drill Chuck, Key with CAT40 adapter |  |
$100 | |||
| ER32 11 PC Collet Set 1/8″ – 3/4″ | M1017 |  |
$130 | ||
| ER32 Collet Wrench | M1018 |  |
$15 | ||
| CAT 40 Tool Vice |  |
$125 | |||
| 123 Block | M1081 |  |
$30 | ||
| Cable Tool Setter | M1043 |  |
$1000 | ||
| CAT40 – ER32 Floating Tap Holder | M1039 |  |
$330 | ||
| 1/2″ 4 Flute Carbide Endmill | M1011 | *Left in picture |  |
$35 | |
| 1/2″ 2 Flute Endmill | M1012 | *Right in picture | |
$17.50 | |
| 1/2 Single End Flute Solid Carbide 60 degree Chamfer Tool | M1040 |  |
$400 | ||
| .030″ Horizontal Dial Test Indicator | M1013 |  |
$42.50 | ||
| Dial Indicator 90 degree Magnetic Base | M1014 |  |
$15 | ||
| Sleeve Puller Assembly for installation on machine |  |
$1600.00 | |||
| In-Line Block Clamping Kit | 18-09-0-00 | ||||
| Lifter Bore Package |  |
$1800.00 | |||
| 1/2-13 T-slot Nut, 5/8 Slot | 12-10-0-02 | Set of 4 |  |
$20 | |
| 3/8-16 T-Slot Nut, 7/16 Slot | 12-10-0-06 | Set of 4 | * | $20 | |
| T-Slot Chip Control Plastic Plug Inserts (7/8″ slot size) | 10 foot
20 foot |
 |
$115
$230 |
||
| Engraving Tool | M1091 |  |
$25 | ||